Opens in a new tab
Blog

Forklift Truck Checklist

Nov 17, 2026

A forklift truck checklist helps an operator spot damage and test essential controls before moving a load. This checklist is designed for sit-down counterbalance forklifts. For other types, add the checks required by the equipment manual. Start with the truck parked and switched off, check the items for its power source, then test its controls in a clear area. Mark each item OK, Defect, or N/A, and take an unsafe truck out of service.

Download the printable forklift checklist to record your inspection. For other truck types, see OSHA’s sample forklift checklists and adapt the checks to the equipment and worksite.

When should a forklift be inspected?

Use this checklist before a shift or before operating a truck, and adapt it to the model, attachments and workplace. In the United States, OSHA requires covered trucks to be examined before use and at least daily; trucks used around the clock are examined after each shift. Follow the applicable local requirements and the truck manufacturer’s instructions.

Record the truck and inspection details

Date and time: __________ Shift: __________ Operator: __________

Truck ID and model: __________ Power source: __________ Hour meter, if available: __________

Use N/A only when the item is not fitted or does not apply. If there is a defect, record its location and symptoms in the notes at the end. “Hydraulic leak at the left mast cylinder” tells the next shift more than a checkmark alone.

Walk-around checklist: truck parked and power off

Park in a safe area, lower the forks, set the parking brake and switch off the truck. Walk around it and check the following without placing any part of your body under raised forks or between mast components.

Inspection itemOKDefectN/A
Forks and carriage: look for cracks, bends, obvious wear and secure fork retainers.□□□
Mast, chains and rollers: look for visible damage, loose parts or obstructions.□□□
Hydraulic hoses and cylinders: look for damaged hoses, loose connections or leaking fluid.□□□
Tires and wheels: look for cuts, missing chunks, embedded debris, damaged wheels or visibly low pneumatic tires.□□□
Under and around the truck: look for fresh oil, coolant or fuel leaks.□□□
Overhead guard, backrest and attachment: check for visible damage, loose fittings and secure mounting where fitted.□□□
Seat belt, steps and handholds: check for damage and secure attachment; make sure the belt fastens.□□□
Capacity plate and warning labels: check that they are present and readable for the fitted configuration.□□□

Solid tires do not need tire-pressure checks. Inspect them for cuts, missing chunks and other damage instead; inspect pneumatic tires for damage and check pressure as directed by the manual.

Pay particular attention to the forks and mast. A crack, damaged chain or hydraulic leak can affect how a load is supported or lifted. Record what you see and keep the truck out of service if the condition affects safe operation; do not try to judge the remaining strength of a damaged fork by eye.

Power-source checks

Complete all rows that apply to the truck. For an electric truck, include the common electric row and the relevant battery-type row. For an internal-combustion truck, include the common engine row and any applicable fuel-system row; add fuel-specific checks from the manual as needed. Mark inapplicable rows N/A. Check fluid levels only where the operator’s manual permits and under its specified conditions. Do not open hot cooling systems or touch damaged battery components.

Inspection itemOKDefectN/A
Electric, all battery types: check that the battery is secured; inspect its visible case, cables and connectors for damage, leakage or loose connections; check the charge indicator.□□□
Serviceable lead-acid battery: have authorized personnel check electrolyte level as directed by the battery manufacturer.□□□
Lithium-ion battery: check the visible case, connections and battery warning indicator where fitted; no water needs to be added.□□□
Internal-combustion engine, including diesel and LPG: check engine oil and coolant levels as directed by the manual.□□□
Diesel: check for fuel leaks and the fuel level.□□□
LPG: check that the cylinder is secured and inspect the tank, mounting and visible hose for damage or leaks.□□□

If you smell gas or suspect an LPG leak, do not start the truck. Move away, keep others clear and follow the site’s emergency procedure. Report damaged batteries, cables or fuel systems rather than attempting an unauthorized repair.

Teams operating different models can use the same common checks and add model-specific items for their electric counterbalance forklifts and internal-combustion counterbalance forklifts.

Operational checks: test in a clear area

If the visual and power-source checks reveal no unsafe condition, a trained operator can start the truck from the operator’s position. Keep people clear and follow the manual when testing. Test without a load unless the manufacturer specifies otherwise.

Inspection itemOKDefectN/A
Warning indicators and gauges: check for abnormal warnings or readings after startup.□□□
Horn, lights and alarms: test the horn and fitted lights or warning devices.□□□
Service and parking brakes: test that they respond and hold as intended.□□□
Steering and travel: at low speed, check steering response and forward and reverse movement.□□□
Mast and hydraulic controls: check lifting, lowering and tilt for smooth response, unusual noise or drift.□□□
Attachments and interlocks: test fitted functions and operator-presence controls according to the manual.□□□

The Huajing 8-ton diesel forklift offers a fork positioner and a sideshifter as options. If either is fitted, test its movement without a load as directed by the manual and check for unusual noise or erratic operation.

A brake pedal that feels different from normal or a mast that drifts is a reason to stop and report the symptom. Do not continue the shift to see whether it improves under load.

What to do when a check fails

Stop the check if continuing would be unsafe. Park and secure the truck if it is safe to do so, report the defect, and mark or isolate the truck according to site procedure so another operator does not use it. Authorized personnel should assess and repair it; return it to service only after the issue has been corrected and the truck has been cleared under the site’s procedure.

Defect notes: __________ Reported to: __________ Time: __________

Truck status: □ Ready for use □ Taken out of service

Make the checklist useful for every shift

Managers can start with the common checks above, then add the equipment and conditions operators actually encounter. For a truck with a sideshifter, add its control test; in a yard where debris collects, make tire-condition checks easy to record. Ask operators and maintenance staff which faults they see repeatedly, and revise the form when equipment or site conditions change.

Keep completed records accessible to the next shift and maintenance team. A note showing where a leak appeared, who was notified and whether the truck remains out of service makes the handoff clear. Recording the inspection is a useful management practice; the cited U.S. federal OSHA examination rule does not itself require a written record.

Daily checks and scheduled maintenance serve different purposes

The operator’s inspection is a quick check for conditions that could make the truck unsafe before work begins. Scheduled maintenance gives authorized service personnel time to inspect, service and replace components as specified by the manufacturer. Keep the inspection record and maintenance history together so recurring leaks, tire damage or control faults are visible to the service team.

For questions about Huajing forklifts, visit our Contact page.

Share:
Orange Huajing forklift, stackers and mini excavator outside a factory.Orange Huajing forklift, stackers and mini excavator outside a factory.

Get In Touch

Leave your information and our team will get back to you shortly.

Google reCaptcha: Invalid site key.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.